b'p ortableH ardnesst esters3821and3822 H ardnesst esterThe 3821 and 3822 units produce non-destructive hardness testing results and are built for the shop floor. They are effectively the same unit, differentiated by the probe type (2kg & 5 kg, respectively). The 2 Kg (3821) probe is suitable for surfaces with an Ra below 200 in and the 5 Kg(3822) probe is suitable for surfaces with an Ra below 400 in. The other key feature about these units is that they perform very well on thin materials. For example, it can successfully measure hardness on steel parts which are down to 0.08 (2mm) in thickness.F eatures ands peciFications Non-Destructive hand held hardness testeresTers Combines UCI and Leeb hardness testing in one state of the art device Test steel with min thickness of .08 and unlimited max thickness Rockwell, Brinell Vickers conversions shown on displayT Large Memory w/USB Output Choice of manual UCI probes; 2kg and 5kg Optional Motorized Probes: .30kg, .80kg, & 1kgf Available Impact Devices(Leeb) D, DC, D+15, G & DL3821/3822 Ultrasonic Thickness TesterCat. No. EDP Description3821 72978 3821 Ultrasonic Hardness Tester3822 72979 3822 Ultrasonic Hardness Tester3821/3822 Ultrasonic Thickness TesterCat. No. EDP DescriptionHT-6000-221 20005 Motorized Probe - 0.3kg, Ultrasoinc Hardness TestersHT-6000-241 20006 Motorized Probe - 0.8kg, Ultrasonic Hardness TestersHT-6000-301 20007 Replacement Cable - Ultrasonnic Hardness Tester ProbesHT-6000-310 20001 Manual Probe - 10kg, Ultrasonic Hardness TestersHT-6000-400 20002 Manual Probe - 1kg, Ultrasonic Hardness TestersHT-6000-400-01 20000 Support Handle - Ultrasonic Portable Hardness TestersHT-6000-711 20003 Standard Probe Cap - Ultrasonic Hardness Tester ProbesHT-6000-721 20004 Deep Hole Probe Cap - Ultrasonic Hardness Tester ProbesHT-6000-MAN 20206 Support Stand - Ultrasonic Hardness Testers52'